SERVICES15
SERVICE AREAS15
Electrical panel replacement in Sanford, FL
Sanford is FPL territory, and plenty of its post-war bungalows still run on 60-amp services with no grounding, which often makes this a service upgrade rather than a simple panel swap.
Interior swaps sit at the low end. Exterior meter-main combination panels cost more because the meter can, mast and riser come with them and the utility has to release the meter.
Four things that are only true in Sanford.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
FPL releases the meter
Sanford is served by Florida Power & Light, a different utility process for service changes than the rest of Seminole County. FPL's meter window sets the schedule, so we confirm it before giving you a date.
60 amps and no ground
Post-war bungalows here often have 60A services and no grounding. Bringing one up to a modern panel means a new grounding electrode system, and sometimes a new feeder, which is the full service rebuild range of $4,400 to $6,500.
The historic district
Some of the oldest housing in the region is here, and knob-and-tube still turns up. A new panel is often only part of the honest answer, and we tell you that at the estimate rather than after the walls are open.
Docks, lifts and the permit
Lakefront and riverfront homes add dock and lift circuits that the load calculation has to account for. Permits go to the City of Sanford Building Division, or Seminole County outside the limits.
Real numbers before you call.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
How the day goes
Grant handles Sanford and north Seminole. You will have a name and a text before anyone is at your door.
Real reviews, word for word.
"Grant wired our new kitchen project. We have used him two other times and plan on using him with our next project."
"…In Phaze sent 3 people for the job, which they completed in 1 day, even vacuuming up afterwards."
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
Straight answers.
What is the difference between an interior and exterior panel replacement?
An interior load center lives in a garage, hallway or closet and is usually the simpler job. An exterior meter-main combination panel sits on the outside wall with the meter, so it involves the meter can, the mast and the utility — more parts, more coordination, more cost.
Do I really need 200 amps?
Not always. If you are not adding load, a 100-amp service in good condition can be fine. We do a load calculation first — if the answer is no, we say no.
How long is the power off?
Typically six to eight hours in one day. We schedule it in the morning so you are back on by dinner.
Who pulls the permit?
We do. Our office files it, schedules the inspection, and meets the inspector. You handle nothing.
Will you patch the wall?
Yes. If we open drywall we close it. That is part of the job, not a change order.
Is a Federal Pacific panel really dangerous?
Stab-Lok breakers have a documented failure-to-trip rate. We will show you what is in your panel and let you decide with real information.
Earned one job
at a time.
Panel replacement in Sanford, done right.
Free estimate. If you do not need the work, we will tell you — which is why people in Sanford call us back years later.